All PCB's are manufactured to ISO 9001 & UL approved standards. A summary of our manufacturing capabilties are listed below.

• Multi-layers up to 20 layers. (higher counts available on request).
• Minimum conductor width 5 thou (0.127mm).
• Minimum conductor spacing 5 thou (0.127mm).
• Minimum plated hole diameter 12 thou (0.3mm).
• V Scoring, cutting & profile routing
• All tooling prepared from Gerber / NC drill data (where supplied).
• Inner layer tracks and gaps down to 5 thou (0.127mm)
• Quick prototype service available for all board types.

Down to: (CAM) Front End System | Communications | Drilling | Etching
Electrical Test: Fixtured and Roving Probe | Fabrication | Lamination
Materials | Plating | Photo Imaging | Quality Systems | Sales | Solder Mask

• Telephone quotes.
• Standard lead time 10 days.
• Quick prototyping from 24 hours.

• 3 CAM seats operating Wise Solutions Gerbtool Ver.12 Fabricator Software
• Solder paste Gerber information can be transferred directly to your screen maker F.O.C upon request.
• DNC link direct to our drill shop.
• Panel layouts and tooling targets added from your technical drawings.
• Minor track changes and drilling modifications carried out F.O.C.
• Routed profiles made directly from. your Gerber data or engineering drawings.

• IS0-9001 accredited. (Certificate No: Q398)
• UL Approved: UL File No: E207295
• C.O.C available on request
• In-house laboratory facilities.

• All material UL 94V-0 approved
• Materials used: FR4, FR2, CEM1, and CEM 3
• Material to BS4584
• Bow & twist <=1% longest dimension
• Maximum Cu weight: 4 oz
• Minimum Cu weight: ½ oz
• Max panel size:(508mm x 457mm) 20" x 18"

• Min drilled hole size: (0.3mm) .012"
• Max drilled hole size: (6.2mm) .236"
• Max routed hole size: (On Request)
• Min slot width: (0.8mm) .032"
• Min/Max hole size tolerances are +/- 0.05mm (0.0015")
• Pad sizes must be 0.3mm (0.012") Min > finished hole sizes

• Maximum number of layers: 16+
• Max board thickness: (4.0mm) .157"
• Min PCB thickness:(0.8mm) .032"
• Panel thickness tolerances are +/- 10% unless otherwise indicated.

• Maximum hole aspect ratio: 5:1
• (SMOBC) solder mask over bare copper, H.A.S.L. (Standard Finish)
• Blasberg DMS-E Direct Metallisation.
• Immersion Nickel / Gold (Ni Au)
• Ultra flat Sterling® Silver
• Electrolytic gold edge connectors

• In-House Photo plotting from Gerber / CAM data
• Electronic scanning of sample boards and original artwork to Gerber Data Tolerance +/- (0.1mm) .004"
• Max artwork size: (600mm x 863mm) 24" x 34"
• In-house Photo-plotting. Maximum size: (601mm x 711mm) 23.66" x 28"
• In-house Gerber Crescent 40 and Mivatec 1620 Photo-Plotters

• All resists/legends imaged from plot master
• Photo-imageable solder resist: Shipley Ronal OPSR 5600 Thermal Cure
• Photo-Imageable Component Ident ink: Shipley Ronal OPSR 5600 Thermal Cure
• Solder resist colours: Green, Blue, Red Black White and Yellow (OPSR 5600)
• Legend ink colours: White, Yellow Black, Red, Green, Blue (OPSR 5600)
• Peelable Solder Resist: Coates XZ93-S Blue

• Min track width: (0.127mm) .005"
• Min spacing :(0.127mm) .005"

• V-scored and supplied in panels.
• Profile routed and supplied in panels
• In-board cut outs and slots

• Via Cleveland Circuits Ltd Web Site www.pcb.co.uk
• Via E-mail to: Sales@pcb.co.uk
• Data types: Preferred data type is Embedded Gerber or RS274-D Excellon or Sieb & Meyer for CNC drilling & routing programs.

• Simultaneous double sided surface mount testing.
• Min SMT pitch (0.3mm) .012"
• Max test area for D/Sided SMT (325mm x 487mm) 19" x 13"
• Max test area for non SMT and S/sided SMT (650mm x 650mm) 25.6" x 25.6"
• Testing prepared from Gerber data.

• In -house Mania Barco Speedy Surface mount testing equipment
• Suitable for small quantities.
• Min SMT pitch (0.2mm) .008"
• Max test area (612mm x 612mm) 24" x 24".
• Test data prepared from Gerber Data